Triangular osteosynthesis and lumbopelvic fixation as a valid surgical treatment in posterior pelvic ring lesions: a systematic review.

Objective: Unstable fractures of the sacrum often occur in patients with pelvic fractures and represent a real challenge for the orthopedic surgeon. Triangular osteosynthesis (TOS) and lumbopelvic fixation (LP) may represent a valid management option for the treatment of this condition. We present a systematic literature review about lumbopelvic fixation and triangular fixation as treatment option for unstable sacral fractures, to assess clinical and radiological outcomes after surgery and to evaluate appropriate indications and impact on the natural history of sacral fractures. Methods: The review is reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. 50 articles out of 108 titles, were considered eligible for the full-text analysis. Finally, 16 studies that met inclusion criteria were included in this review. Results: Overall, 212 patients (87 males, 58 females) with sacral fractures treated with TOS triangular fixation or LP lumbopelvic fixation were collected. The mean age was 37.6 years. Mean follow-up reported in all studies was 24.14 months. Conclusion: The results presented by the different authors, highlight the effectiveness of TOS triangular fixation and LP lumbopelvic fixation for the treatment of unstable sacral fractures associated with other pelvic fractures, in terms of function, stability, cost-effectiveness, and quality of life postoperatively.

Femoral neck system versus dynamic hip screw for fixation of femoral neck fracture in the adult: a meta-analysis.

Objective: To determine the efficacy of femoral neck system compared to dynamic hip screws in treating femoral neck fractures. METHODS: The systematic review was conducted from January to March 2023, and comprised literature search on PubMed, Embase, Scopus, Ovid, Cochrane Central Register of Controlled Trials, China National Knowledge Infrastructure and Wanfang databases for relevant studies published up to March 1, 2023. Study data as well as demographic and outcome parameters related to the patients were extracted, and the methodological index for non-randomised studies was used to assess the risk of bias. Review Manager software was used to conduct metaanalysis. RESULTS: Of the 567 studies initially found, 6(1%) were included, with the publication date ranging from August 2021 to February 2023. There were 5(83.3%) studies published in English and 1(16.7%) in Chinese. Of the 577 patients with femoral neck fractures, 287(49.7%) were treated with femoral neck system and 290(50.3%) with dynamic hip screws. Significant differences were shown between the two groups regarding operation duration, blood loss, internal fixation failure rate and Harris hip score (p=<0.05). There was no significant differences between the groups regarding time from injury to surgery, hospitalisation, complication rate and femoral neck shortening rate (p>0.05). Conclusion: The novel femoral neck system could optimise surgical procedures, with shorter operation times and lesser blood loss. The femoral neck system and dynamic hip screws were comparable in terms of complication rates and postoperative hip function.

Ilizarov method and its combined methods in the treatment of long bone defects of the lower extremity: systematic review and meta-analysis.

BACKGROUND: Ilizarov method has become one of primary methods for treating bone defects. Currently, there is growing trend in the application of modified Ilizarov methods (e.g., applying unilateral external fixators or with flap tissue) and its combined methods (e.g., Ilizarov method with antibiotic spacer or internal fixation) to manage bone defects. However, there is a lack of studies with systematical evaluation of the clinical effects of these evolving methods. This study aimed to conduct a systematic review and meta-analysis for overall evaluating the clinical effects on long bone defects of lower extremity in Ilizarov methods and its combined methods. METHODS: Studies were identified in three electronic databases (Pubmed, Embase and Cochrane Library) from the earliest indexing year through November 01, 2022, and relevant data were extracted subsequently. The total number of participants, number of participants with bone unions, bone result or functional result, and related complications including pin infection, pin loosening, pain, refracture, limb discrepancy, malalignment, joint stiffness, recurrent infection, and amputation were extracted in this study. Then, union rate (defined as the proportion of patients who achieved bone unions) and specific complication incidence rate (defined as the proportion of patients who experienced specific complication) were pooled estimated respectively. Relative risk (RR) was used for comparing the clinical effects among various Ilizarov technique. RESULTS: Sixty-eight case series studies, 29 comparative studies, and 3 randomized clinical trials were finally included. The union rate of Ilizarov methods was 99.29% (95% CI: 98.67% ~ 99.86%) in tibial defects and 98.81% (95% CI: 98.81% ~ 100.00%) in femoral defects. The union rate of Ilizarov method with antibiotic spacer and intramedullary nail in tibial defects was 99.58% (95% CI: 98.05% ~ 100.00%) and 95.02% (95% CI: 87.28% ~ 100.00%), respectively. Compared to the Ilizarov methods, the union rate of the Ilizarov method with antibiotic spacer in tibial defects increased slightly (RR = 1.02, 95% CI: 1.01 ~ 1.04). Meanwhile, compared to Ilizarov methods, we found lower excellent rate in bone result in Ilizarov method with antibiotic spacer, with the moderate to high heterogeneity. Compared to the Ilizarov method, lower rate of pin infection, higher rate of recurrent infection and amputation were observed in Ilizarov method with intramedullary nail, however, the findings about the comparison of pin infection and recurrent infection between the two groups were presented with high degree of statistical heterogeneity. CONCLUSION: Our study confirmed the reliable treatment of Ilizarov methods and its combined technique on long bone defects, and founded there were significant differences on some complications rate between Ilizarov methods and its combined technique. However, the findings need to be confirmed by further studies.

Comparison between Novel Anatomical Locking Guide Plate and Conventional Locking Plate for Acetabular Fractures: A Finite Element Analysis.

The treatment of complex acetabular fractures remains a complicated clinical challenge. Our self-designed novel anatomical locking guide plate (NALGP) has previously shown promising potential in T-shaped acetabular fractures (TAF), but a direct comparison with conventional fixations is yet to be made. The TAF model was established based on a volunteer's computer tomography data and then fixed with double column locking plates (DLP), a posterior column locking plate with anterior column screws (LPACS), and our NALGP. Forces of 200 N, 400 N, and 600 N were then loaded on the model vertically downward, respectively. The stress distribution and peaks and maximum displacements at three sites were assessed. We found that the stress area of all three plates was mainly concentrated around the fracture line, while only the matching screws of the NALGP showed no obvious stress concentration points. In addition, the NALGP and DLP showed significantly less fracture fragment displacement than the LPACS at the three main fracture sites. The NALGP was found to have less displacement than DLP at the posterior column and ischiopubic branch sites, especially under the higher loading forces of 400 N and 600 N. The fixation stability of the NALGP for TAF was similar to that of DLP but better than that of LPACS. Moreover, the NALGP and its matching screws have a more reasonable stress distribution under different loads of force and the same strength as the LPACS.

Anterior Transarticular Crossing Screw Fixation for Atlantoaxial Joint Instability: A Biomechanical Study.

OBJECTIVE: To evaluate the biomechanical stability of anterior transarticular crossing screw (ATCS) and compare it with anterior transarticular screw (ATS) which may provide basic evidence for clinical application. METHODS: Eight human fresh cadaveric specimens (occiput-C4) were tested with 5 conditions including the intact status, the injury status (type II odontoid fracture), the injury+ATS fixation status (traditional bilateral ATS fixation); the injury+unilateral ATCS fixation status; and the injury+bilateral ATCS fixation status. Specimens were applied to a pure moment of 1.5 Nm in flexion-extension, lateral bending, and axial rotation, respectively. The range of motions (ROMs) and the neutral zones (NZs) of C1 to C2 segment were calculated and compared between 5 status. RESULTS: ATS and ATCS fixations significantly reduced the motions in all directions when compared with the intact and injury statues (p < 0.05). In flexion-extension, the ROMs of ATS, unilateral ATCS, and bilateral ATCS were 4.7° ± 2.5°, 4.1° ± 1.9°, and 3.2° ± 1.2°, respectively. Bilateral ATCS resulted in a significant decrease in ROM in flexion-extension when compared with ATS and unilateral ATCS (p = 0.035 and p = 0.023). In lateral bending and axial rotation, there was no significant difference in ROM between the 3 fixations (p > 0.05). Three fixations resulted in similar NZs in all directions (p > 0.05). CONCLUSION: ATCS is a biomechanically effective alternative or supplemental method for atlantoaxial instability.

Finite Element Analysis of the Mechanical Strength of Phalangeal Osteosynthesis Using Kirschner Wires.

Background: Kirschner wire (K-wire) fixation is widely used to repair metacarpal and phalangeal fractures. In this study, we simulated K-wire osteosynthesis of a 3-dimensional (3D) phalangeal fracture model and investigated the fixation strength at various K-wire diameters and insertion angles to clarify the optimal K-wire fixation method for phalangeal fractures. Methods: The 3D phalangeal fracture models were created by using computed tomographic (CT) images of the proximal phalanx of the middle finger in five young healthy volunteers and five elderly osteoporotic patients. Two elongated cylinders representing K-wires were inserted according to various cross-pinning methods; the wire diameters were 1.0, 1.2, 1.5 and 1.8 mm, and the wire insertion angles (i.e. the angle between the fracture line and the K-wire) were 30°, 45° and 60°. The mechanical strength of the K-wire fixed fracture model was investigated by using finite element analysis (FEA). Results: The fixation strength increased with increasing wire diameter and insertion angle. Insertion of 1.8-mm wires at 60° achieved the strongest fixation force in this series. Fixation strength was generally stronger in the younger group than the elderly group. Dispersion of stress to cortical bone was a critical factor to increase fixation strength. Conclusions: We developed a 3D phalangeal fracture model into which we inserted K-wires; using FEA, we clarified the optimal crossed K-wire fixation method for phalangeal fractures. Level of Evidence: Level V (Therapeutic).

The preoperative Hounsfield unit value at the position of the future screw insertion is a better predictor of screw loosening than other methods.

OBJECTIVE: Screw loosening is a widely reported issue after spinal screw fixation and triggers several complications after lumbar interbody fusion. Osteoporosis is an essential risk factor for screw loosening. Hounsfield units (HU) value is a credible indicator during bone mineral density (BMD) evaluation. As compared with the general evaluation of BMD, we hypothesized that specific measurements of HU at the precise location of the future screw insertion may be a better predictor of screw loosening. METHODS: Clinical data of 56 patients treated by oblique lumbar interbody fusion (OLIF) of the L4-L5 segments with an anterior lateral single rod (ALSR) screw fixation were reviewed in this study. Vertebral bodies with ≥ 1 mm width radiolucent zones around the screw were defined as screw loosening. HU in the insertional screw positions, the central transverse plane, and the average values of three and four planes were measured. Regression analyses identified independent risk factors for screw loosening separately. The area under the receiver operating characteristic curve (AUC) was computed to evaluate predictive performance. RESULTS: The local HU values were significantly lower in the loosening group, regardless of the selected measuring methods. The AUC of screw loosening prediction was higher in the insertional screw positions' HU than other frequently used methods. CONCLUSIONS: The HU value measured in the insertional screw position is a better predictor of ALSR screw loosening than other methods. The risk of screw loosening should be reduced by optimizing the trajectory of the screw based on the measurement of HU in preoperative CT. KEY POINTS: • Osteoporosis is an essential risk factor for screw loosening, and Hounsfield units (HU) are a credible predictor during bone mineral density (BMD) evaluation. • The HU value measured in the insertional screw position is a better predictor of screw loosening than other frequently used HU measurement methods. • The risk of screw loosening might potentially be reduced by optimizing the trajectory of the screw based on the measurement of HU in preoperative CT.

Three fixation methods in the revision of medial defective intertrochanteric fractures with failed treatment: a finite element analysis / 中华骨科杂志

Objective:To compare the biomechanical differences of dynamic condylar screw (DCS), locking compression plate (LCP) combined with DCS and medial anatomic buttress plate (MABP) combined with DCS in the revision of medial defective intertrochanteric fractures by finite element analysis.Methods:The femoral CT imaging data provided by a healthy adult volunteer were used to reconstruct the solid three-dimensional model of femur by Mimics 21.0 and Geomagics Studio 12. Evans-Jensen II B intertrochanteric fracture was established by Ansys Workbench18.0. The three-dimensional models of proximal femoral nail antirotation (PFNA), DCS, LCP and MABP were reconstructed in Solidworks 2015. The PFNA was assembled with the fracture model, and then the PFNA was removed to establish the postoperative failure model of femoral intertrochanteric fracture and then simulated the fixation in the hip-preserving revision surgery of femoral intertrochanteric fractures: non-medial support reconstruction group (DCS); indirect medial support reconstruction group (DCS+LCP) and partial direct medial support reconstruction group (DCS+MABP). Finally, the forces on the hip joint of 70 kg normal people during standing (700 N), slow walking (1,400 N), brisk walking (1,750 N) and going up and down stairs (2,100 N) were simulated in Abaqus 6.14, the relative displacement and stress peak value of fracture end and stress distribution and stress peak value of internal fixation in different models were recorded.Results:At 700 N axial load, the relative displacement of fracture end fixed by DCS, DCS+LCP and DCS+MABP was 0.28, 0.13 and 0.09 mm; the peak stress of the fracture end was 49.01, 15.29 and 1.35 MPa; the peak stress of internal fixation was 230, 220 and 174 MPa, respectively. At 1,400 N axial load, the relative displacement of the fracture end of the three internal fixation methods was 0.56, 0.24 and 0.16 mm; the peak stress of fracture end was 108.49, 28.96 and 3.12 MPa; the peak stress of internal fixation was 469, 352 and 324 MPa, respectively. At 1,750 N axial load, the relative displacement of the fracture end of the three group was 0.70, 0.30 and 0.20 mm; the peak stress of the fracture end was 139.59, 37.57 and 4.17 MPa; the peak stress of internal fixation was 594, 421 and 393 MPa, respectively. At 2,100 N axial load, the relative displacement of the fracture end of the three internal fixation methods was 0.85, 0.35 and 0.23 mm; the peak stress of the fracture end was 170.05, 46.36 and 5.24 MPa; the peak stress of internal fixation was 724, 504 and 460 MPa, respectively.Conclusion:The partial direct reconstruction of medial support under the neck by DCS+MABP may have better biomechanical properties in the revision of medial defective intertrochanteric fractures.

Periprosthetic fractures: the increasing challenges / 中华创伤骨科杂志

Surgery for periprosthetic fractures (PPF) is one of the most complex procedures in orthopedics. It is difficult, highly risky and extremely challenging, because the patients are usually advanced in age and suffering from essential organ dysfunction, numerous comorbidities, poor overall body condition, poor bone quality combined with osteolysis and even bone loss, and because the surgeons have to apply the concepts and techniques of Modern Orthopedic Trauma and artificial joint revision techniques in fracture fixation and prosthesis revision. This paper expounds on the clinical challenges due to the characteristics of PPF in order to call on clinical surgeons to update their concepts, deal with seriously and standardize their PPF treatment, and effectively improve their efficacy.

A clinical study of a novel manual screw placement based on anatomical study of the 7th cervical vertebra / 中华创伤骨科杂志

Objective:To evaluate the feasibility, accuracy, effectiveness and safety of a novel manual placement of cervical 7 pedicle screws via the posterior approach of cervicothoracic junction.Methods:A retrospective case series study was conducted to analyze the 35 patients with injury to the lower cervical spine or cervicothoracic junction who had been treated by a novel manual placement of cervical 7 pedicle screws at Department of Orthopedics, The First Affiliated Hospital of Zhengzhou University from March 2015 to July 2021. There were 16 males and 19 females, with an age of (52.7±13.2) years. The core of this placement was to determine the entry point of cervical 7 pedicle screws. After the intersection of the upper edge of the cervical 7 lamina and the medial edge of the superior articular process was recorded as point A while the intersection of the lateral edge of the inferior articular process and the lower edge of the transverse process as point B, the intersection of the outer and middle 1/3 of the AB line was taken as the screw entry point, with the screw placement angle perpendicular to the lamina line or slightly inclined from 30° to 40° to the head side and outward. The length, diameter and placement angle of the cervical 7 pedicle screws were recorded and compared postoperatively between the left and right sides to explore the feasibility of this novel manual placement. According to the Rampersaud method, the screw positions were graded 1 week and 6 months after operation to evaluate the accuracy of this manual placement. The visual analogue scale (VAS) and the Japanese Orthopaedic Association (JOA) score were compared between preoperation, 1 week and 6 months after operation to evaluate the effectiveness of this placement. The postoperative complications were counted to evaluate the safety of this method. Loosening, displacement and breakage of the screws were observed by CT scanning at 6 months after operation.Results:This case series was followed up for (9.8±1.7) months. There was no significant difference in the length, diameter or placement angle of the screws between the left and right sides ( P>0.05). A total of 66 cervical 7 pedicle screws were placed. There was no change in the screw position grading at 1 week or 6 months after surgery. Grade A was achieved in 64 screws, Grade B in 2 screws, and Grade C or D in none. The VAS scores before operation, 1 week and 6 months after operation were respectively 4.4±1.7, 3.8±1.0 and 1.1±1.1, and the JOA scores respectively 6.7±2.2, 13.2±1.5 and 15.3±1.2. The VAS and JOA scores at 1 week and 6 months after operation were significantly improved compared with the preoperative values ( P<0.05). The improvement rates in JOA at 1 week and 6 months after operation were 62.7%±13.3 % and 83.9%±11.6%, respectively. There were no complications related to the placement of cervical 7 pedicle screws; there was no wound hematoma or infection. No loosening, displacement or breakage of the screws was observed by the 6-month follow-up. Conclusion:The novel manual placement of cervical 7 pedicle screws via the posterior approach of cervicothoracic junction is feasible, accurate, effective and safe.

Efficacy of implant surface culture in identification of microorganisms for fracture device-related infection: a preliminary analysis / 中华创伤骨科杂志

Objective:To evaluate the efficacy of implant surface culture in identification of pathogens for fracture device-related infection.Methods:A prospective study was conducted to include the eligible patients who were diagnosed with infection after fracture fixation and needed surgical removal of the implants according to treatment principles at Division of Orthopaedics and Traumatology, Department of Orthopaedics and Traumatology, Nanfang Hospital from November 2020 to January 2023. With informed consent, after rinsing with aseptic normal saline twice, their implants were gently covered with a thin layer of tryptone soy agar medium. Thereafter, the implants were incubated at 37 ℃ with 5% CO 2. Changes on the surface and in the surroundings of the implants were observed every day for consecutive 2 weeks to avoid drying up by supplementing the medium when necessary. Once pathogen colonies formed, samples were collected at 3 independent sites using sterile swabs for laboratory identification. Comparisons were made between the samples from implant surface culture and the intraoperative multisite samples from conventional culture. Results:Included were a total of 75 patients [56 males and 19 females with an age of (46.2±15.4) years]. The most common infection site was the tibia (37 cases), and the most common type of implants was plate and screw (59 cases). The positive rate of implant surface culture was significantly higher than that of conventional culture (86.7% vs. 52.0%, P<0.001). 80.5% (29/36) of the negative patients detected by the conventional culture obtained positive results by the implant surface culture; three of the positive patients detected by the conventional culture obtained negative results by the implant surface culture. The culture results were positive by both culture methods in 36 patients, and consistent by both culture methods in 35 patients, yielding a consistent rate of 97.2% (35/36). The time for implant surface culture was significantly shorter than that for conventional culture [1 (1, 2) d versus 3 (3, 4) d] ( P<0.001). Of the 65 positive patients by the implant surface culture, 59 were detected with monomicrobial infection, with Staphylococcus aureus on the top (29 cases). Conclusion:As the implant surface culture, a novel method, may be superior to the conventional culture in a significantly higher positive rate and a shorter culture time, it may be used as an effective adjunct to the conventional culture in identification of pathogens for fracture device-related infection.

Posterior long segment instrumentation combined with transpedicular impaction bone grafting or with bone cement augmentation in the treatment of stage III Kümmell disease: a comparison of efficacies / 中华创伤杂志

Objective:To compare the efficacies of posterior long segment instrumentation combined with transpedicular impaction bone grafting or with bone cement augmentation in treating stage III Kümmell disease.Methods:A retrospective cohort study was conducted to analyze the clinical data of 38 patients with stage III Kümmell disease who were admitted to Zhengzhou Orthopedic Hospital between January 2016 and December 2020. The study included 8 male and 30 female patients, with ages ranging from 59 to 81 years [(68.9±4.9)years]. The vertebral fractures occurred at T 8 in 1 patient, T 11 in 9 patients, T 12 in 10 patients, and L 2 in 10 patients. Seventeen patients underwent posterior long segment instrumentation combined with transpedicular impaction bone grafting (impaction bone grafting group), and 21 patients underwent posterior long segment instrumentation combined with bone cement augmentation (bone cement group). The surgical duration, intraoperative blood loss, and incidences of postoperative complications were compared between the two groups. Additionally, the visual analogue score (VAS), Japanese orthopedic association (JOA) score, and Cobb angle were compared before the operation, at 1 week and 3 months post-operation, and at the final follow-up for both groups. The study also compared bone healing at the last follow-up and postoperative complication rates between the two groups. Results:All the patients were followed up for 24-35 months [(28.7±2.9)months]. The impaction bone grafting group had a surgical duration of (150.7±25.4)minutes and intraoperative blood loss of (285.3±48.6)ml, significantly different from those in the bone cement group [(132.0±21.1)minutes, (251.4±44.8)ml] (all P<0.05). Before the operation, there were no significant differences in the VAS, JOA score, or Cobb angle between the two groups (all P>0.05).The VAS was (3.2±0.8)points, (2.7±0.5)points and (2.2±0.7)points in the impaction bone grafting group and was (2.7±0.6)points, (2.6±0.7)points and (2.4±0.8)points in the bone cement group at 1 week and 3 months post-operation and at the final follow-up, respectively. The VAS in the impaction bone grafting group was significantly higher than that in the bone cement group at 1 week post-operation ( P<0.05); however, no significant differences were found at 3 months post-operation or at the last follow-up (all P>0.05). There was no significant difference in the JOA score between the two groups at 1 week or 3 months post-operation, or at the final follow-up (all P>0.05). The Cobb angle in the impaction bone grafting group was (5.1±1.3)°, (5.9±1.8)° and (6.5±2.5)° at 1 week and 3 months post-operation, and at the final follow-up, significantly lower than that in the bone cement group [(8.4±1.6)°, (12.6±2.1)°, and (14.5±3.3)°] (all P<0.01). All the patients in the impaction bone grafting group achieved bone healing at the last follow-up. One patient in the impaction bone grafting group experienced delayed incision healing, whereas two patients in the bone cement group had poor bone healing. The complication rate was 5.9% (1/17) in the impaction bone grafting group and 9.5% (2/21) in the bone cement group ( P>0.05). Conclusions:Posterior long segment instrumentation combined with transpedicular impaction bone grafting or with bone cement augmentation are both effective in alleviating pain and improving the spinal function for stage III Kümmell disease. The former procedure is associated with longer surgical duration and increased intraoperative blood loss, but it can provide superior correction and maintenance of kyphosis deformity, promoting the healing of the injured vertebrae.

Mises stress analysis of 42A2 type tibial mid segment oblique fracture fixed with external locking plate at different angles / 中国医师杂志

Objective:To establish a three-dimensional model of locking plate fixation for 42A2 type oblique tibial fractures with different fracture line directions and different angles between the fracture line and the long axis of the tibia. Finite element analysis was used to calculate and analyze the biomechanics of locking plate, screw, and tibia, providing theoretical basis for clinical application.Methods:A healthy adult volunteer, 25 years old, male, with a height of 173 cm and a weight of 69.5 kg, was selected to perform computed tomography (CT) scans on the left tibia. Relevant data were obtained to establish a locking steel plate fixation model for 42A2 type tibia with different oblique fracture line directions and different angles between the fracture line and the long axis of the tibia. Eight hole pure titanium plates were used for fixation, respectively. We compared the Mises stress changes of locking plates, screws, and tibia in different angle fracture models.Results:In the case of a 42A2 type fracture in the left oblique direction with a fracture line from outside to inside, the maximum Mises stress in the tibia was 114 MPa, the maximum Mises stress in the screw was 279.8 MPa, and the maximum Mises stress in the locking steel plate was 302.4 MPa; In the case of a 42A2 type fracture in the right oblique fracture with a fracture line from the bottom to the top, the maximum Mises stress of the tibia was 93.41MPa, the maximum Mises stress of the screw was 353.4 MPa, and the maximum Mises stress of the locking steel plate was 411.8 MPa.Conclusions:Regardless of the oblique fractures in both left and right directions, the maximum stress values are: locking plate>screw>tibia; When the position of the locking steel plate is fixed, the maximum stress values of the locking steel plate and screw are both right oblique fracture>left oblique fracture; And the maximum stress values all increase with the increase of angle.

Effect analysis of vertebroplasty combined with posterior decompression and internal fixation in the treatment of spinal metastases with neurological symptoms / 国际外科学杂志

Objective:To analyze the efficacy of vertebroplasty combined with posterior decompression and internal fixation in the treatment of spinal metastases with neurological symptoms.Methods:This study was a retrospective analysis of 32 cases with neurological symptoms caused by spinal metastatic tumor in the Department of Orthopedics, Beijing Friendship Hospital, Capital Medical University from June 2016 to January 2022. All 32 patients (20 males, 12 females) aged between 39 to 85 years were enrolled in this study, with a mean age of (64.8±11.9) years. Surgery time, bleeding volume, modified Tokuhashi score, spinal instability neoplastic score (SINS) were collected. The visual analogue score (VAS), Oswestry disability index (ODI), Karnofsky performance scale (KPS) and American spinal cord injury association (ASIA) score before surgery, 1 month after surgery, 3 months after surgery and 6 months after surgery were collected and analyzed. Measurement data with normal distribution were represented as mean±standard deviation( ± s), and the comparison before and after surgery was conducted using repeated-measures analysis of variance test. Measurement data with skewed distribution were represented as M( Q1, Q3). Results:All 32 patients were followed up for 6 months. The operation time was (209.6±49.0) min, and the blood loss was (462.9±298.3) mL. 14 patients(43.8%) were treated with blood transfusion. The modified Tokuhashi score was 8.09±2.89, and the SINS was 8.81±1.97. The VAS score before surgery, postoperative 1, 3, 6 months were 7.47±0.98, 3.87±0.87, 2.91±0.73 and 2.34±0.60, respectively. ODI score before surgery, postoperative 1, 3, 6 months were 79.13±9.50, 39.14±6.31, 34.43±6.42 and 31.08±4.80, respectively. KPS score before surgery, postoperative 1, 3, 6 months were 49.69±14.70, 64.68±15.02, 71.88±12.81 and 75.63±10.76, respectively. The ASIA grading at 6 months follow-up was improved compared to preoperative baseline. Postoperative complications occurred in 4 cases, including nerve root injury (1 case), bone cement leakage in paravertebral soft tissue (1cases), bone cement leakage in paravertebral vein(1case) and acute thoracic epidural hematoma (1case).Conclusion:Vertebroplasty combined with posterior decompression and internal fixation can effectively relieve pain, relieve the compression of spinal cord and nerve, recover nerve functions, and improve the quality of life of patients with spinal metastatic tumor.

Comparison of therapeutic effects between anatomical reconstruction of the coracoclavicular ligament at the original insertion point and clavicular hook plate fixation in the treatment of acromioclavicular joint dislocation / 中华骨科杂志

Objective:To compare the clinical efficacy of anatomical reconstruction of coracoclavicular ligament at the original insertion point and clavicular hook plate fixation in the treatment of acromioclavicular joint dislocation.Methods:Retrospective analysis was made on the data of 67 patients with acromioclavicular joint dislocation who received surgical treatment in the Department of Orthopaedics of the First Affiliated Hospital of Nanjing Medical University from June 2015 to January 2021. According to the surgical method, they were divided into reconstruction group (using the technique of anatomical reconstruction of coracoclavicular ligament at the original insertion point) and hook plate group (using the clavicular hook plate). There were 37 cases in the reconstruction group, including 26 males and 11 females, aged 47.2±9.6 years (range, 18-65 years), 13 cases on the left and 24 cases on the right. Among the 37 patients, 8 were sports injuries, 14 were falls, 11 were traffic accidents, and 4 were external force injuries. The average time from injury to surgery was 8.3±2.3 days. There were 30 cases in the hook plate group, including 24 males and 6 females, aged 47.4±9.7 years (range, 18-67 years), 12 cases on the left and 18 cases on the right. Among the 30 patients, 7 were sports injuries, 11 were falls, 9 were traffic accidents, and 3 were external force injuries. The average time from injury to surgery was 7.9±2.6 days. The surgical time, incision length, intraoperative bleeding, hospital stay, postoperative coracoclavicular separation ratio, and postoperative complications were compared between the two groups. Constant-Murley score and visual analog scale (VAS) were used to assess the shoulder joint function and pain degree of patients.Results:Both groups of patients were followed up, with a follow-up time of 12.3±0.4 months for the reconstruction group and 12.2±0.5 months for the hook plate group. The operation time (105.8±10.0 min), incision length [12.0 (11.0, 13.0) cm] and hospitalization time (6.8±2.1 d) in the reconstruction group were longer than those in the hook plate group [48.3±4.9 min, 10.0 (10.0, 11.0) cm, and 5.5±2.7 d], while the intraoperative blood loss (75.1±3.9 ml) was less than that in the hook plate group (90.3±6.3 ml), the differences were statistically significant ( P<0.05). The VAS [4.0 (3.0, 5.0), 3.0 (3.0, 3.0), 2.0 (1.0, 2.0) points] and Constant-Murley score (65.4±4.5, 84.9±2.5, 90.1±2.5 points) of the reconstruction group at 3 days, 3 months, and 12 months after surgery were better than those of the hook plate group [5.0 (4.0, 5.0), 4.0 (4.0, 4.0), 3.0 (3.0, 4.0) and 56.9±3.5, 79.6±4.0, 86.8±2.4 points], the difference was statistically significant ( P<0.05). At the last follow-up, there was a statistically significant difference in the separation ratio of coracoclavicular distance between the reconstruction group (0.12±0.08) and the hook plate group 0.22±0.15 ( t=3.25, P=0.002). There was no significant difference ( Z=-0.52, P=0.605) in the separation ratio of acromioclavicular distance [0.16 (0.05, 0.25) and 0.16 (0.04, 0.40)]. In the hook plate group, 6 cases had shoulder joint foreign body sensation and 2 cases had acromioclavicular joint redislocation (both Rockwood type III). Because the shoulder joint function did not affect their daily life, neither patient underwent secondary surgery. And no case of acromioclavicular joint redislocation occurred in the reconstruction group. Conclusion:Compared with the clavicular hook plate fixation, anatomic reconstruction of coracoclavicular ligament at the original insertion point in the treatment of acromioclavicular joint dislocation can reduce the pain of the shoulder joint earlier, which has the characteristics of small trauma, good effect, and reduces the steps of internal fixation removal, and has good clinical curative effect.

Functional Outcome Of Extra-Articular Distal Humerus Fracture Fixation Using A Lateral Column Locking Compression Plate.

Background: : A host of different methodologies have been implemented in the management of distal humerus fractures, including conservative measures and surgical fixation with a variety of plates. This study was conducted to evaluate the functional outcome of open reduction and internal fixation of extra articular distal humerus fractures with distal humerus locking compression plate. Methods: This is a retrospective cohort study of patients with close extra articular distal humerus fractures who underwent open reduction and internal fixation with a distal humerus locking compression plate at Ghurki Trust Teaching Hospital from July 2017 to December 2019. Various demographic indicators were used for data analysis and radiological union was assessed in serial follow-ups. Functional outcome was evaluated using the Mayo Performance Elbow Score at the final follow-up. Results: Thirty-one patients presented with extra-articular fracture of humerus (N=31) with average age 33.5±9.90 years. The average follow-up period was 13.8 months. Radiological union was achieved in 14.8 weeks (range 12-20 weeks). Out of 31 patients, 28 had excellent results with mean Mayo Elbow Performance Score of 94.8. Two patients (6.5%) had radial nerve palsy post-operatively. Conclusion: This study shows that open reduction and internal fixation of extra-articular distal humerus fractures with distal humerus locking compression plates allows for stable fixation, good functional outcome, and low complication rates.

Efficacy of the femoral neck system in femoral neck fracture treatment in adults: A systematic review and meta-analysis.

BACKGROUND: Controversy remains around the available choices for the internal fixation of a femoral neck fracture. The femoral neck system (FNS) was developed in 2018 and has been widely applied since then as it can provide rigid fixation stability with less damage to the bone mass around the fracture. However, no systematic reviews and meta-analyses have investigated the efficacy of the FNS in comparison with that of traditional internal fixation in the treatment of femoral fractures. AIM: To assess the efficacy of the FNS in comparison with that of cannulated compression screws (CCS) in the treatment of femoral fractures through systematic review and meta-analysis. METHODS: Five electronic databases (PubMed, Embase, Cochrane Central Register of Controlled Trials, China National Knowledge Infrastructure, and Wanfang) were searched from the earliest publication date to December 31, 2021. Reference Citation Analysis (https://www.referencecitationanalysis.com/) was used to check the results and further analyze the related articles. Controlled trials were included if the FNS was applied for the femoral neck fracture in adults and if it was compared with CCS for the achievement of internal fixation. The measurement outcomes included the required operation time, observed patient's blood loss, extent of fracture healing, patient's Harris Hip score (HHS) at the last follow-up, and records of any complications (such as failure of internal fixation, femoral neck shortness, avascular necrosis of the femoral head, and delayed union or nonunion). RESULTS: Ten retrospective controlled studies (involving 711 participants) were included in this meta-analysis. The meta-analysis showed that compared with CCS, use of the FNS could not decrease the operation time [standardized mean difference (SMD): -0.38, 95% confidence interval (CI): -0.98 to 0.22, P = 0.21, I 2 = 93%), but it could increase the intraoperative blood loss (SMD: 0.59, 95%CI: 0.15 to 1.03, P = 0.009, I 2 = 81%). The pooled results also showed that compared with CCS, the FNS could better promote fracture healing (SMD: -0.97, 95%CI: -1.65 to -0.30, P = 0.005, I 2 = 91%), improve the HHS at the last follow-up (SMD: 0.76, 95%CI: 0.31 to 1.21, P = 0.0009, I 2 = 84%), and reduce the chances of developing femoral neck shortness (OR: 0.29, 95%CI: 0.14 to 0.61, P = 0.001, I 2 = 0%) and delayed union or nonunion (OR: 0.47, 95%CI: 0.30 to 0.73, P = 0.001; I 2 = 0%) in adult patients with femoral neck fractures. However, there was no statistically significant difference between the FNS and CCS in terms of failure of internal fixation (OR: 0.49, 95%CI: 0.23 to 1.06, P = 0.07, I 2 = 0%) and avascular necrosis of the femoral head (OR: 0.46, 95%CI: 0.20 to 1.10, P = 0.08, I 2 = 0%). CONCLUSION: Compared with CCS, the FNS could decrease the chances of developing femoral neck shortness and delayed union or nonunion in adults with femoral neck fractures. Simultaneously, it could accelerate fracture healing and improve the HHS in these patients.

Biomechanical evaluation of the reconstruction of the calcar femorale in femoral neck fractures: a comparative finite element analysis.

OBJECTIVE: Femoral neck fractures are common. We evaluated the biomechanical performance of an internal fixation method based on traditional three cannulated screws (3CS) inserted from below the fracture in the direction of the calcar femorale in the treatment of Pauwels III femoral neck fracture. METHODS: We constructed and evaluated a three-dimensional model of a Pauwels III femoral neck fracture with four models of internal fixation (3CS, and 150°, 155°, and 160° nailing angles) for reconstruction of the calcar femorale, by finite element analysis (FEA). RESULTS: The peak stress values at the fracture ends in the 3CS, 150°, 155°, and 160° nailing angle models were 30.052 MPa, 33.382 MPa, 34.012 MPa, and 29.858 MPa; peak stress values for internal fixed stress were 315.121 MPa, 228.819 MPa, 198.173 MPa, and 208.798 MPa; and the maximum displacement of the femoral head was 13.190 mm, 13.183 mm, 12.443 mm, and 12.896 mm, respectively. CONCLUSION: FEA showed that the new nailing methods and the 160° nailing angle for reconstruction of the calcar femorale showed better performance in resisting shearing force for Pauwels III femoral neck fracture, with better mechanical properties, than those with the other three models. These findings can provide a clinical reference.

Comparison of hook plate versus T-plate in the treatment of Neer type II distal clavicle fractures: a prospective matched comparative cohort study.

BACKGROUND: This study aimed to compare the clinical and radiological outcomes of distal clavicle fracture fixation with a hook plate versus the standard non-locking T-plate for unstable Neer type II fractures. METHODS: A prospective matched cohort study including two groups of hook plates and T-plates fixation was conducted in our two tertiary trauma centers. Patients with distal clavicle fractures Neer type II were assessed for union and the Constant-Murley score (CMS) at 1-, 3-, and 6-month follow-ups. Inadequate radiographic consolidation > 6 months after surgery was defined as non-union. Subscales of CMSpain, CMSactivities of daily living, CMSrange of motion (ROM), and CMSstrength were also compared between groups. According to recommendations, the implant was removed after union confirmation in the hook plate at a planned second surgery. RESULTS: Sixty consecutive patients were enrolled: 30 in the T-plate group and 30 in the hook plate group. CMS showed similar functional outcomes for T-plates and hook plates at all follow-ups (Month 6: 92.0 vs. 91.7, P = 0.45). However, on the month 1 follow-up, the T-plate group scored higher than the hook plate group for ROM and pain (CMSpain = 13.0 vs. 12.3, P = 0.03; CMSROM = 35.2 vs. 33.2, P = 0.002). Despite this, Pain, ROM, and other CMS domains were comparable between groups (P > 0.05). The mean time to union was 2.5 + 1.4 months for the T-plate group and 2.3 + 1.6 months for the hook plate group (P = 0.44). There was one fixation failure in each group and one periprosthetic fracture in the hook plate group (two revisions for the hook plates and one for T-plates, P = 1.00). Non-union and other complications were not observed. CONCLUSION: Both surgical approaches resulted in full recovery and good function. However, in the hook plate group ROM and pain scores were lower at 1 month. Standard non-locking T-plates are a viable alternative to hook plates with low cost and promising outcomes for treating displaced distal clavicle fractures.

Comparative Analysis of Secondary Outcomes in Treatment of Charcot Neuropathy: A Systematic Review.

BACKGROUND: Charcot neuroarthropathy (CN) is commonly associated with diabetic neuropathy and can predispose patients to amputations. Management remains a challenge, with no definitive treatment. This study examines major postoperative complications associated with open reduction with internal (intramedullary) nails, fixation, external fixation, or combined internal and external fixation for correction of the deformity. METHODS: We reviewed available literature using PubMed, OvidSP, Scopus, and Cochrane and searched bibliographies of the included studies to identify additional pertinent references. After review and agreement among 4 raters, a total of 15 studies were included in this analysis. RESULTS: Hardware removal rates were 0.133 for intramedullary nails, 0.007 for external fixators, and 0.050 for combined fixation. Rates of hardware complication were 0.182 for intramedullary nails and 0.007 for external fixators. Wound dehiscence occurred at rates of 0.059 for intramedullary nails and 0.216 for combined fixation. The rate of deep infections was 0.031 for intramedullary nails, 0.032 for external fixators, and 0.113 for combined fixation. The rate of irrigation and debridement was 0.007 for external fixators. CONCLUSION: Rates of hardware removal (13.3%) and complications (18.2%) were high with intramedullary nails. Dehiscence (21.6%) and deep infection (11.3%) were high in combined fixation. Other complications occurred relatively rarely. LEVEL OF EVIDENCE: Level III.